4
4.1
Transmission Procedures
4.1.1
Using the Automatic Document Feeder
1
Press the [SCAN] key.
The copier switches to Scan mode,
and the Scan screen appears.
2
Place the document to be scanned
in the Automatic Document Feeder.
❍
Adjust the guides to the size of
the document.
❍
Load the document with the
surface to be scanned face up.
3
Press the [123/ABC] key.
4
Press the keys on the 10-key pad to
enter the e-mail address, and then
press the [YES] key. The e-mail
address can also be specified using
one of the following methods.
❍
"Specifying the Destination Using One-Touch Dial Keys" on
page 4-10.
❍
"Specifying the Destination Using Speed Dial Numbers" on
page 4-11.
❍
"Specifying the Destination Using the Tel Book {Phone Book}" on
page 4-13.
4-2
Using Scan to E-mail Operations
IF-118