To Copy Onto Postcards - Konica Minolta bizhub 180 User Manual

4

To copy onto postcards

As an example, the following procedure describes how to make copies onto 5-13/
16 inch (148 mm) × 3-15/16 inch (100 mm) postcards loaded into the Manual
bypass.
Tip
When using the 10-Key Pad to enter a custom paper size, the values are
entered in millimeters. The conversion ratio is shown below.
1 inch = 25.4 mm
1
Position the document(s) to be copied.
❍ Refer to "Loading the Document" on page 3-9.
2
Adjust the paper guides for the
Manual bypass, and load the
postcards.
❍
Load postcards with the shorter
side as the leading edge, as
shown in the illustration.
Note
Load postcards so that the surface
to be printed on faces downward.
With the Manual bypass, only one postcards can be loaded at a time.
4-14
4.3 Copying Onto Various Types of Media
bizhub 180