Specifying Copy Settings; Copy Setting 1" & "Copy Setting 2" Menus - Konica Minolta bizhub 180 User Manual

7.6 Specifying Copy Settings

7.6 Specifying Copy Settings
"COPY SETTING 1" & "COPY SETTING 2" menus
The settings that are automatically selected when the machine is turned off or the
[Panel Reset] key is pressed are called the "default settings". From the "COPY
SETTING 1" menu, the default settings for various functions can be specified.
"COPY SETTING 1" menu:
No. COPY SETTING 1
1 PAPER PRIORITY
2 DENSITY PRIORITY
3 DENSITY LEVEL(A)
4 DENSITY LEVEL(M)
5 BINDING POS.
6 MARGIN SETTING
7 ERASE SETTING
8 SMALL ORIGINAL
bizhub 180
Description
This function can be used to specify the tray that should be
given priority when the "AUTO" Zoom setting is selected.
• The manufacturer's default setting is "1ST".
This function can be used to set the density to "TEXT",
"PHOTO" or "TEXT/P" when the machine is turned off or the
[Panel Reset] key is pressed.
• The manufacturer's default setting is "TEXT/P".
This function can be used to set the density level of the "AUTO"
Density setting to one of the three settings between "LIGHT"
and "DARK".
• The manufacturer's default setting is the middle level
( ).
This function can be used to set the density level of the manual
density setting to one of the nine settings between "LIGHT" and
"DARK".
• The manufacturer's default setting is the middle level
( ).
This function can be used to set whether the first page of a book
to be scanned is on the left (left-bound) or on the right (right-
bound).
• The manufacturer's default setting is "LEFT".
This function can be used to specify the width of the binding
area (margin) between 0 inch (0 mm) and 13/16 inch (20 mm)
(in units of Approx. 1/16 inch (1 mm)) when copying documents
to be bound.
• The manufacturer's default setting is 3/8 inch (10 mm).
This function can be used to specify between 3/16 inch (5 mm)
and 13/16 inch (20 mm) (in units of Approx. 1/16 inch (1 mm))
the width that is erased when making copies with the "Erase"
function set to "LEFT", "UPPER" or "FRAME".
• The manufacturer's default setting for the "LEFT", "UPPER"
and "FRAME" Erase settings is 3/8 inch (10 mm).
This function is used to specify whether or not copying is
possible after loading a small document whose size cannot be
automatically detected.
• The manufacturer's default setting is "ENABLE".
7
7-37