To Copy Using The Multi Bypass Tray - Konica Minolta bizhub 180 User Manual

5.4 Making Copies on Manually Fed Paper

To copy using the Multi bypass tray

1
Load the document to be copied.
❍ Refer to "Loading the Document" on page 3-9.
2
Adjust the Bypass tray extender and
the paper guides to fit the size of the
paper.
3
Load the paper with the front side
facing down, lightly sliding the paper
as much as possible into the feed slot.
The manual bypass mark (
appears in the bottom line of the
screen.
? Are sheets of cards or postcards
loaded?
➜ Make sure that they are not curled
(rolled).
4
Check that "YES/NO" appears in the
bottom line of the screen, and then
press the [No/C] key.
The "PAPER SOURCE SETUP"
menu appears.
Note
"YES/NO" is displayed for approximately 5 seconds after paper is loaded
into the Multi bypass tray.
5
Use the and
the type of paper loaded.
❍ Select from the following four
paper type settings.
"PLAIN"
"OHP"
"CARD"
"ENVELOPE"
bizhub 180
)
keys to select
5
5-19