To Make Copies Using The "File Margin" Function - Konica Minolta bizhub 180 User Manual

6

To make copies using the "File Margin" function

1
Load the document to be copied.
❍ Refer to "Loading the Document" on page 3-9.
2
Press the [File Margin] key.
The "File Margin" indicator lights up.
? Do you know how large a binding
margin is created?
➜ The width for the binding can be
set between 0 inch (0 mm) and 13/
16 inch (20 mm), in Approx.1/16
inch (1 mm) increments. The
manufacturer's default setting is 3/
8 inch (10 mm).
➜ The width of the binding margin can be changed using the "MARGIN
SETTING" function in the Utility mode ("To set the "BINDING POS."
function" on page 7-44).
3
If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
4
Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
6-20
6.6 Making Copies for Filing ("File Margin" function)
bizhub 180