Dynaudio AIR 15 Reference Manual page 89

Preset no. Preset name Preset description
1-15 Empty / User Presets 1 to 15 are "empty" until you choose to store something,
after which the respective preset name is "User Preset".
Presets can be named using AIR Control software.
16 Neutral All parameters neutral – a good starting point
17 BassMgt 50Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
18 BassMgt 80Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
19 BassMgt Ex50Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
20 BassMgt Ex80Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
21 BassMgt THXSim Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
22 BassMgt SC120 Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1
23 Cinema Flat Mixing for Cinema without compensation for X-curve. 5.1
24 Cine X-curve Mixing for Cinema in a small room – compensates for X-curve. 5.1
25 Cine X-curve2 Mixing for Cinema in a small room – compensates for modified X-curve. 5.1
26 Cinema X-50Hz Mixing for Cinema with small room X-curve compensation and bass management
27 Cinema X-80Hz Mixing for Cinema with small room X-curve compensation and bass management
28 Cine X-SC120Hz Mixing for Cinema with small room X-curve compensation and bass management
29 Cinema 80Hz Mixing for Cinema with bass management but without compensation for X-curve
30 Cinema SC120 Mixing for Cinema with bass management but without compensation for X-curve
31 OB Van SC120 OB vans and very small rooms where rear channels are close to sweet spot
32 Neutral All parameters neutral – a good starting point
* X-curve #1: ANSI / SMPTE222M – 1.5 dB roll off
per octave from 2 kHz. For more information, see
"X-Curves" on page 58.
** X-curve #2: ANSI / SMPTE222M Mod. – 3 dB roll off
per octave from 4 kHz. For more information, see
"X-Curves" on page 58.
Dynaudio Professional AIR reference manual – 2014-09-28
Preset level in dB
L
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Notes on LFE Gain
Please note that the LFE channel should be mixed with
+10 dB headroom. If you are not able to boost your
LFE monitor output, you should add +10 dB gain on
your AIR BASE subwoofer. Most format encoders/de-
coders take the LFE boost into account, meaning that
you should leave the AIR BASE LFE gain at 0 dB when
playing back DTS-encoded or DOLBY-encoded materi-
al on your AIR system.
Gain
in dB
C R Ls Rs Sub LFE
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -3 -3 0 0
0 0 -2 -2 0 0
0 0 0 0 0 0
Presets
X-Over X-Curve 1 X-Curve 2
* **
(Hz)
Off Off Off
50 Off Off
80 Off Off
50 Off Off
80 Off Off
115 Off Off
120 Off Off
Off Off Off
Off Yes Off
Off Off Yes
50 Yes Off
80 Yes Off
120 Yes Off
80 Off Off
120 Off Off
120 Off Off
Off Off Off
86