Dynaudio AIR 15 Reference Manual page 5

The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated "danger-
ous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer's in-
structions.
8. Do not install near any heat sources such as ra-
diators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Dynaudio Professional AIR reference manual – 2014-09-28
11. Only use attachments/accessories spe cified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as pow-
er-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the appa-
ratus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has
been dropped.
Warning!
To reduce the risk of fire or electrical shock, do not
►
expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as
vases, are placed on the equipment.
This apparatus must be earthed.
►
Use a three wire grounding type line cord like the
►
one supplied with the product.
Be advised that different operating voltages require
►
the use of different types of line cord and attach-
ment plugs.
Check the voltage in your area and use the correct
►
type. See table below:
Voltage Line plug according to standard
110-125V UL817 and CSA C22.2 no 42.
220-230V CEE 7 page VII, SR section 107-2-D1/IEC 83
page C4.
240V BS 1363 of 1984. Specification for 13A fused
plugs and switched and unswitched socket
outlets.
Important safety instructions
This equipment should be installed near the socket
►
outlet and disconnection of the device should be
easily accessible.
To completely disconnect from AC mains, discon-
►
nect the power supply cord from the AC receptacle.
The mains plug of the power supply shall remain
►
readily operable.
Do not install in a confined space.
►
Do not open the unit – risk of electric shock inside.
►
For use at altitude 2000 m or lower
►
Mains ground must be connected.
►
Norwegian:
►
Apparatet må tilkoples jordet stikkontakt.
Swedish:
►
Apparaten skall anslutas till jordat uttag.
Finnish:
►
Laite on liitettävä suojakoskettimilla varus-tettuun
pistorasiaan.
Caution
You are cautioned that any change or modifications not
expressly approved in this manual could void your au-
thority to operate this equipment.
Service
There are no user-serviceable parts inside.
►
All service must be performed by qualified person-
►
nel.
2