Setup menu ►
Monitor tasks setup
Use the Setup monitor tasks menu to assign tasks to
the monitors in your AIR System.
Each monitor must be given a task indicating its func-
tion and position. The System Controller – Master unit
will only be able to identify and control all monitors in
your AIR system correctly if these tasks have been as-
signed correctly.
Selecting the task for an AIR monitor
From the home screen, press the ENTER key.
►
Press the DOWN key until "Setup menu" is dis-
►
played.
Press the ENTER key.
►
Press the DOWN key until "Set monitor tasks" is
►
displayed.
Press the ENTER key.
►
Press the UP and DOWN keys to select a monitor.
►
Each monitor is identified by its serial number,
which is shown on a label with a barcode on the
back.
Press the ENTER key.
►
Press the UP and DOWN keys to select a monitor
►
task.
Press the ENTER key to confirm your selection.
►
Press the EXIT key repeatedly to return to the
►
home screen.
Dynaudio Professional AIR reference manual – 2014-09-28
Displayed task name
Full monitor task name
No task
No task assigned
L Front
Left Front
R Front
Right Front
Center
Center
(C) Sub
(C) Subwoofer
L Sub
Left Subwoofer
R Sub
Right Subwoofer
L Sur
Left Surround
R Sur
Right Surround
C Sur
Center Surround
LsChain
Left Surround / Chain
RsChain
Right Surround / Chain
CsChain
Center Surround / Chain
L Inner
Left Inner
R Inner
Right Inner
Fig. 8: Available monitor tasks
AIR Menu structure and parameters
23