AIR Control software –
introduction
AIR Control software is the installation and configura-
tion software for the Dynaudio Professional AIR series
monitors.
AIR Control software allows you to carry out advanced
calibration and alignment of your AIR monitoring sys-
tem. The software provides access to advanced tools
and features of AIR monitors and subwoofers, including
timing and SPL calibration and parametric equalizers
for each monitor.
AIR Control also lets you define and store custom set-
ups and presets with selective parameter locking.
About TC PC-IP installer software (discontinued)
AIR Control replaces the TC PC-IP installer software,
which was developed for professional installers. The
new AIR Control application design is easier to use and
offers an even more efficient way to fine-tune your AIR
monitoring system.
Dynaudio Professional AIR reference manual – 2014-09-28
AIR Control software
main features
Global
Advanced configuration, calibration and installation
►
software for Dynaudio Professional AIR
Reference levels control for calibrated listening
►
Advanced bass management with variable cross-
►
over frequencies
EQ link: Group your speakers using up to 3 EQ
►
groups
Advanced locking of parameters
►
Front panel control lock
►
Setups can be saved as presets
►
For OS X and Windows
►
Per monitor controls
Four band parametric precision EQ
►
Adjustment of individual delay times and calibration
►
levels
Role and room position control
►
Test tone generator
►
AIR Control software
AIR Control software
system requirements
System requirements for Mac OS X
CPU: Intel CPU
►
(min. 2 GHz recommended)
RAM: 2 GB RAM
►
Operating system: Apple OS X 10.8 or higher
►
USB 2.0, USB 3.0 or serial port
►
System requirements for Microsoft Windows
CPU: Intel-compatible CPU
►
(min. 2 GHz recommended)
RAM: 2 GB RAM
►
Operating system: Microsoft Windows 7 or higher
►
USB 2.0, USB 3.0 or serial port
►
Due to the touch-based user interface, AIR Control
software works very well with Windows-based tablets.
However, please note that AIR Control software will not
run on Android or iOS tablets (iPads).
For more information on the cables/adapters required
to connect your computer and your AIR system, see
"Cables" on page 82.
67