Stereo Setup - Digital Or Analog - Dynaudio AIR 15 Reference Manual

Stereo setup – digital or analog
Stereo setup – digital or analog
L + R
Master
Left
System Ctrl.
Fig. 13: This illustration shows how to connect a standard stereo setup.
Dynaudio Professional AIR reference manual – 2014-09-28
Digital (AES) or analog audio signals
Slave
Right
Understanding and using this setup
Audio signals are represented by solid lines.
►
TC link signals are represented by dashed lines.
►
The left monitor is set as the System Controller by
►
setting the TC Link button on the rear panel to the
"out" position.
The left monitor receives both the left and right
►
input signals.
The right monitor receives audio via the TC-LINK
►
RJ-45 connection.
The AIR Remote or a computer running the AIR
►
Control software (both optional) can be connected
to any available TC LINK Out connection.
AIR setups
31