Dynaudio AIR 15 Reference Manual page 21

AIR menu structure
This overview shows the AIR parameter structure accessible via the AIR monitor set as System Controller. Default values are highlighted.
[Serial No.] [Monitor task] Home screen –
Volume -50.0 dB see "Home screen" on page 20.
Bass Management X-over *Select Mode: Off / X-over 50Hz / X-over 80Hz
/ X-over Ext 50Hz / X-over Ext 80Hz / X-over
THX 80Hz / X-over SC 120Hz
Setup Menu Setup "xxxx"
Set monitor tasks – *Select AIR Master "xxxx"
External clock
BNC Sync "xxx"
Input Sensitivity
A-Input Gain
Calibrate monitor – *Select AIR Master "xxxx"
Recall Preset *Select preset 1 User
Store Preset *Select preset 1 User
Utility Menu Duration before Standby:
15 min / 30 min / 1 h / 1.5 h / off
Powersave: 1 h / 1.5 h / 2.5 h / 3 h / 5 h / off
Backlight: on / auto / off
Autosave volume: on / off
Dynaudio Professional AIR reference manual – 2014-09-28
Press the Enter key to navigate the menus structure shown below.
*Select setup: Empty / Custom / Stereo analog / Stereo digital / 5.1 analog / 5.1 digital / 6.1 ana-
log / 6.1 digital / 5.3 analog / 5.3 digital / 5.1 digital/6 Master
*Select task: No task / L Front / R Front / Center / (C) SUB / L Sur / R Sur / C Sur / L SUB / R
SUB / L Chain / R Chain / L Inner / Custom 1-4
*Select clock: BNC Input Off / BNC Input On
*Sensitivity A-Input: +9 dBu / +15 dBu / +21 dBu / +27 dBu
For AIR monitors:
Pink Noise: Off/On
Calib: 0.0 dB
Rel. Lev: -5.0 dB
Position: Neutral / Wall / Corner / Console C. / Wall C. / Corn
Bass: 0.0 dB
Treble: 0.0 dB
For AIR BASE subwoofers:
Pink Noise: Off / On
Calib: 0.0 dB
Rel. Lev: -5.0 dB
LFE LP: Off / On
LFE Gain: 0 to 14 dB
Polarity: 0/180 degrees
Phase: 0 to 180 degrees
Preset locations: User presets (1 to 15) and factory presets (16 to 32)
Storage locations for user presets: 1 to 15
Operating your AIR monitors
18