Bass Management Page - Dynaudio AIR 15 Reference Manual

Bass management page

Fig. 42: AIR Control software – Global – Bass
management page
Use the Bass management page in the Global section
of the AIR Control software to recall Bass management
presets and activate Advanced bass management fea-
tures.
To learn more about bass management, see "Configur-
ing bass management" on page 21 and "Bass man-
agement" on page 117.
Dynaudio Professional AIR reference manual – 2014-09-28
Recalling Bass management presets
Click the Preset field in the Bass Management
►
(Preset) section of the bass management page.
This will assign Bass management preset selection
to the large slider on the right of the window.
Drag the slider to select the desired bass manage-
►
ment preset.
For a description of the bass management presets,
their parameters and values, see "Bass management
modes and crossover frequencies" on page 21.
Advanced bass management
In bass management presets, the states of the three
filters (Satellite, Sub 4 and Sub 2) are predefined. Using
Advanced bass management, you can activate these
filters individually for fine-grained control of demanding
speaker setups.
To activate Advanced bass management, click the On
button in the Advanced section of the Bass manage-
ment page. This will enable the remaining buttons in
this section.
Click the field for the filter (Satellite HP, Sub 4th
►
order or Sub 2nd order) that you want to configure.
This will assign this filter to the large slider on the
right of the window.
Set the desired crossover frequency for this filter or
►
drag the slider down to set the filter to Off.
Click the LFE = Sub button to include the LFE
►
channel in bass management.
AIR Control software
73