The AIR display and keys
Use the four keys to the left and the right of the display
to navigate the menus of your AIR Master unit.
Fig. 6: The display and keys of an AIR master unit
ENTER key
The ENTER key has two main functions:
To enter the menus currently displayed.
►
To set the displayed parameter in Edit mode.
►
When a parameter can be edited using the arrow keys
to the right of the display, a "*" is set as the first charac-
ter in front of the parameter.
EXIT key
The EXIT key is used to exit the current display and go
to previous menu level.
Dynaudio Professional AIR reference manual – 2014-09-28
Arrow (up and down) keys
These keys are used for navigating and adjusting pa-
rameter values.
A parameter can be edited when it has been selected
using the ENTER key. Editable parameters are indicat-
ed by an asterisk ("*").
Once you have set a parameter (e.g. a monitor task),
you do not need to confirm it. Changes are applied im-
mediately. However, if you later want to recall a given
configuration, you need to store it as a preset first – see
"Storing presets" on page 47.
Overload Indication LED
When this LED flashes, the monitor's built-in amp is
driven beyond maximum performance. A continuous
overload will activate the amp protection circuit and the
monitor will be shut down. The monitor can be reacti-
vated after a short period of cooling down.
This situation will NOT damage the monitor in any way.
Operating your AIR monitors
Basic navigation/
operation
Use the two arrow keys to select a value for a pa-
►
rameter or a submenu. When a parameter namer
is preceded by an asterisk (" * "), it can be altered
using the arrow keys.
Use the ENTER key to enter a menu or to confirm
►
an operation.
Use the EXIT key to move up one level in the
►
menu hierarchy or to discard (cancel) an operation.
Navigating the setup menu
From the home screen, press the ENTER key.
►
"Bass Management" is displayed.
Press the DOWN key until "Setup menu" is dis-
►
played.
Press the ENTER key again.
►
Press the UP and DOWN keys to select the
►
desired submenu (for example "Setup" or "Set
monitor tasks").
Press the ENTER key to open the desired sub-
►
menu.
An asterisk will be shown in front of the menu
►
name (for example "*Select clock"), indicating that
you can select an option.
Press the UP and DOWN keys to select the de-
►
sired setting.
After making settings, press the EXIT key (repeat-
►
edly, if required) to close the menu and return to
the home screen.
17