The setups shown in this chapter will only oper-
ate correctly if all connections are made exactly as
seen in the illustrations!
Important: Master monitor setting
In each setup, one specific Master monitor must be
►
set as the System Controller.
To set a Master monitor as System Controller, the
►
TC LINK button on the rear panel of this monitor
must be set to the Out position.
The TC LINK button on all other Master monitors
►
must be set to the In position.
Reading the setup illustrations
The AIR Remote shown in most setups is an op-
►
tional hardware remote control. For more informa-
tion, see "AIR Remote" on page 63.
Audio signals are represented by solid lines:
►
TC link signals are represented by dashed lines:
►
Dynaudio Professional AIR reference manual – 2014-09-28
AIR setups
30