Dynaudio AIR 15 Reference Manual page 75

Recalling (activating) presets
Click the Recall tab on the left side of the window.
►
The name of the currently selected preset is shown
in the upper right corner of the window, within the
green "Recall Preset" area.
Select the preset category you want to access:
►
Factory presets or User presets.
For a list and description of factory presets, see
"Presets" on page 85.
If you have selected the Factory presets group,
►
select the desired preset group ("Bass Manage-
ment", "Cinema", "Misc(ellaneous)") by clicking on
its name in the left column.
Select the desired preset from the column on the
►
right.
Press the large green Recall Preset button in
►
the upper right corner of the window to recall the
selected preset.
Dynaudio Professional AIR reference manual – 2014-09-28
Storing and naming the current preset
Fig. 41: AIR Control software – Global – File page –
Store section
Click the Store tab on the left side of the window.
►
The name of the currently selected preset is shown
on top of the window.
If you want to edit the name of the preset before
►
storing it, just click the name shown under "Cur-
rent" and edit it using your computer keyboard.
15 User preset slots in two banks are available.
►
Select the bank ("Bank 1" or "Bank 2") by clicking
its name in the left column.
Select the preset slot where you want to store the
►
preset in the column on the right.
Click the large red Store Preset button in the upper
►
right corner of the window to store the current
preset to the selected User preset slot. This will
overwrite (delete) the preset currently stored in this
preset slot.
To learn what global and local parameters are stored in
presets and which parameters aren't, see "Parameter
storage" on page 47.
AIR Control software
72