Global and local
parameters
AIR Control software allows you to access and set two
kinds of parameters:
Global parameters that apply to all monitors in
►
an AIR system or define general attributes of this
system, and
Local parameters for individual monitors.
►
When setting up your AIR system using AIR Control
software, start by setting the Global parameters and
then proceed to adapt the settings for individual moni-
tors. Descriptions of monitor-specific (local) parameters
start with "Selecting monitors for configuration" on page
77.
To access the Global parameters, click the Global but-
ton on top of the AIR Control software window.
Dynaudio Professional AIR reference manual – 2014-09-28
Basic editing procedures
If a parameter or function in the AIR Control software
is represented by a round button, click this button to
select/deselect it or execute the respective function.
Fig. 36: Click a button to select/deselect or activate the
respective feature.
Fig. 37: Click a parameter field to select it and then
edit its value using the large slider on the right side of
the window
If a parameter in the AIR Control software is represent-
ed by a rectangle with a parameter name, the current
parameter value and a miniature fader, you can either...
drag the miniature fader in the field with your
►
mouse or
select the parameter field by clicking it once and
►
then use the large fader on the right side of the
window to adjust it. You can also use the up and
down keys on your computer keyboard to adjust
a selected parameter. If your mouse has a scroll
wheel, you can also use this scroll wheel to
change the selected parameter.
AIR Control software
AIR Control software
version information
Fig. 38: AIR Control software – version information
Click the Dynaudio Professional logo in the upper right
corner of the window to display a version information
panel. Click into the panel to dismiss it.
70