Eq Link Page - Dynaudio AIR 15 Reference Manual

EQ Link page

Fig. 43: AIR Control software – Global – EQ Link
page. Group 1 (containing the left and right front
speakers) is active.
Use the EQ Link page in the Global section of the AIR
Control software to group the EQs of AIR monitors, al-
lowing you to modify their settings more easily.
Dynaudio Professional AIR reference manual – 2014-09-28
Assigning monitors to EQ Groups
Three EQ Groups (shown on the left of the window) are
available.
Click the name of one or multiple monitors in the
►
left half of the window to select them. Selected
monitors are highlighted.
To remove a monitor from the selection, click its
►
button again.
To assign all selected monitors to an EQ Group,
►
click the button for that EQ Group on the right side
of the window.
All previously selected monitor buttons will now be
surrounded by a ring in the color of that EQ Group.
Removing monitors from an EQ Groups
Click the name of one or multiple monitors in the
►
left half of the window to select them. Selected
monitors are highlighted.
Click the Remove button in the right half of the
►
window. The previously selected monitors will be
removed from their group.
Activating an EQ Group
To use an EQ Group (i.e., have the EQ settings for all
monitors in that group synced), you need to activate it.
To activate an EQ Group, click the Active button right to
the respective EQ Group button (1, 2 or 3) in the right
half of the EQ link window. Multiple groups can be ac-
tive at the same time.
AIR Control software
74