Power Source; Switching The Main Power On; Switching The Power On - Fuji Xerox ApeosPort-IV C7780 User Manual

2 Product Overview

Power Source

The machine is provided with the power switch and the main power switch.
Power switch
To use the machine, press the power switch to
the [ | ] position to switch its power on. You can
start operations after the machine warms up.
Main power switch
Press the main power switch to the [
The <Main Power> indicator goes out on the right
side of the control panel, and the machine powers
off. Do not switch the main power off except when
you connect a cable to the machine or clean the machine. Switching off the main power
may erase the data in the memory when using the Fax service.
2

Switching the Main Power On

The following describes how to switch the main power on.
Important • Do not switch off the main power immediately after switching on the main power. This may
1
Make sure that the power cord is plugged in correctly.
2
Open the front cover.
3
Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
4
Close the front cover.

Switching the Power On

The following describes how to switch the power on.
The machine takes approximately 90 seconds to warm up and to be ready to copy or
print after switching the power on. This may take more time depending on your machine
configuration.
Switch the power off at the end of the day or when not using the machine for an
extended period of time.
50
damage the hard disk and the memory or cause a machine malfunction.
] position.
Power switch
switch
Main power