Registering Stored Programs For Build Job; Deleting Stored Programs - Fuji Xerox ApeosPort-IV C7780 User Manual

8 Stored Programming
A stored program registration is canceled when the <Interrupt> button is pressed, the
Auto Clear feature causes a time-out, or a pop-up window (such as a paper jam
window) appears.
If the Fax service is available, one touch buttons can be used.

Registering Stored Programs for Build Job

Up to 100 actions can be registered with one stored program for Build Job. Up to 40
stored programs can be registered in the machine.
The following describes how to register actions with stored programs.
1
Select [Store Build Job].
Note
2
Select a number to register a stored program.
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies that a stored program is being registered. For
8
information on the settings, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored
Programming Tone" in the Administrator Guide.
4
Press the <Start> or <Clear All> button.
Note
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.353).

Deleting Stored Programs

The following describes how to delete stored programs.
1
Select [Delete].
352
• Once a job is stored to a button, it cannot
be overwritten.
• Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [
• The machine sounds an audible tone while a stored program is being registered.
• Press the <Interrupt> button to cancel registration.
• An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes "No Name".
] to move to the next screen.