Step 2 Selecting The Features - Fuji Xerox ApeosPort-IV C7780 User Manual
Hide thumbs
Also See for ApeosPort-IV C7780:
- Quick user manual (48 pages) ,
- Administrator's manual (739 pages)
Table of Contents
Advertisement
5 Scan
2
Load the document face down, and align it
against the top left corner of the document
glass.
3
Close the document cover.
Step 2 Selecting the Features
On the [Services Home] screen, you can select from six Scan services: [E-mail], [Store
to Folder], [Network Scanning], [Scan to PC], [Store to USB], and [Store & Send Link].
You can select features for each service.
Note
5
E-mail
Scans a document and sends the scanned data as an e-mail attachment after
converting the data to TIFF, JPEG, PDF, DocuWorks, or XPS (XML Paper
Specification).
Store to Folder
Scans a document and saves the scanned data in a folder on the machine.
You need to create a folder in advance. For information on how to create a folder, refer to "5 Tools" >
"Setup" > "Create Folder" in the Administrator Guide.
Network Scanning
Scans a document using a job template created on CentreWare Internet Services.
When Scan to Home is enabled and the Remote Access feature is available, the
scanned data can be transferred to a different destination according to an
authenticated user.
For information on how to create a job template, refer to the help of CentreWare Internet Services.
Scan to PC
Scans a document and sends the scanned data to a network computer via the FTP or
SMB protocol.
Store to USB
Scans a document and saves the scanned data to a USB memory device.
Store & Send Link
Scans a document and temporarily saves the scanned data on the machine. The user
is notified by e-mail of the URL to the location where the scanned data is stored. Then,
the user can access the URL to retrieve the scanned data.
258
• The features displayed on the screen depend on your machine configuration.
• When the Accounting feature is enabled, a user ID and passcode may be required. Ask your
system administrator for the user ID and passcode.
• To use the Scan services, network settings are required. For information on the network
settings, refer to "9 Scanner Environment Settings" in the Administrator Guide.
Advertisement
Table of Contents
