Sample Job (Checking The Finished Output Of The Copy) - Fuji Xerox ApeosPort-IV C7780 User Manual

3 Copy

Sample Job (Checking the Finished Output of the Copy)

When making multiple sets of copies, you can print a sample set to check the finished
output and then print the remaining copy sets. You can select whether to continue or
cancel the job after the confirmation. This feature also allows you to change the number
of copy sets. The sample copy is included in the total number of copy sets.
Note
1
Select [Sample Job].
2
Select [On].
3
Off
No sample set is made.
On
A sample set is made.
[Copy] Screen When Sample Job is in Progress
After the sample set is copied, the machine pauses the job and displays the [Copy]
screen.
Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copies
entered before. Enter a new quantity using the numeric keypad. The new value must
include the number of the sample set that has already been printed. When reducing the
quantity, specify a value between 1 (sample set) and the number of copies entered
before.
Note
160
• After a sample set is output, the machine automatically outputs the data remained if the
machine is left uninstructed for the period specified in [Auto Job Release]. For more
information on [Auto Job Release], refer to "5 Tools" > "Common Service Settings" >
"Machine Clock/Timers" > "Auto Job Release" in the Administrator Guide.
• If you specify "1" as a new quantity and then press the <Start> button, the machine will not
process the job.