Job Flow Procedure; Step 1 Opening The [Job Flow Sheets] Screen - Fuji Xerox ApeosPort-IV C7780 User Manual

7 Job Flow Sheets

Job Flow Procedure

Job flow sheets are categorized into two types according to the target. One type of job
flow sheets targets scanned documents, and the other type targets files stored in
folders. This section describes the first type of job flow sheets, targeting scanned
documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job
Flow" (P.335).
The following describes the procedure to operate a job flow. Refer to the following
section for each procedure.
To create and register a job flow sheet, use a computer.

Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................342

Step 2 Selecting a Job Flow Sheet ............................................................................................343
Step 3 Confirming/Changing the Job Flow Sheet.....................................................................343
Step 4 Starting the Job Flow Sheet ...........................................................................................343
Note
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
1
Press the <Services Home> button.
7
2
Select [Job Flow Sheets].
342
• To create a job flow sheet, use EasyOperator or Device Setup Tool. EasyOperator is
included in the Driver CD Kit. Device Setup Tool is included in the ApeosWare Management
Suite, which you can download from our website.
<Services Home> button