From (Setting The Sender's Address) - Fuji Xerox ApeosPort-IV C7780 User Manual

S/MIME Certificate
To check whether or not any certificate is linked to the e-mail address, select [Change
Settings].
If S/MIME is enabled, and a certificate is linked to the e-mail address, you can check
the contents of the S/MIME certificate.
Note • This feature is supported only by the ApeosPort series.
For information on S/MIME communication, refer to "13 Encryption and Digital Signature Settings" >
"Configuration of E-mail Encryption/Digital Signature" in the Administrator Guide.

From (Setting the Sender's Address)

Specify a sender's e-mail address. You can specify only one address as a sender's
address.
Note • When the Authentication feature is enabled, the e-mail address registered in user
• [From] may not be editable depending on the setting in the System Administration mode.
• When you send e-mail with a digital signature, the machine's e-mail address becomes the
For information on a digital signature, refer to "13 Encryption and Digital Signature Settings" >
"Configuration of E-mail Encryption/Digital Signature" in the Administrator Guide.
1
Select [From].
2
Select any option from the pop-up menu
displayed.
Address Book
Allows you to select the sender's e-mail address from the Address Book.
For information on the Address Book, refer to "Address Book (Specifying an E-mail Address)" (P.268).
Keyboard
Allows you to enter the sender's e-mail address with up to 128 characters using the
displayed keyboard.
Close Menu
Hides the pop-up menu.
information is automatically set as a sender's address. For more information on user
information, refer to "5 Tools" > "Accounting" > "Create/View User Accounts" in the
Administrator Guide.
sender's address.
E-mail
5
273