Specifying A Destination Using The Keyboard Screen - Fuji Xerox ApeosPort-IV C7780 User Manual

4 Fax
1
Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch
screen.
Important • The one touch buttons have a sensor to detect which page of one touch buttons (1 - 24, 25 -
Note
4

Specifying a Destination Using the Keyboard Screen

You can specify recipients using the keyboard screen.
Important • When transmission to a certain recipient is prohibited in the System Administration mode,
1
Select [New Recipients].
2
Specify a recipient with up to 128 characters
using the keyboard displayed on the touch
screen.
Note
202
48, or 49 - 72) is currently opened. Before pressing a one touch button, turn over the one
touch panel completely, and take off your hand from the panel. Do not press the button while
you are turning over the panel.
• Do not place any objects near the one touch buttons, nor spill any liquid over them.
• To specify multiple recipients, press the one touch buttons continuously.
• Turn the one touch panel over to press the one touch buttons 25 and above.
the [New Recipients] button cannot be used.
• When the Server Fax service is used, a destination must be less than 50 characters long.
The available characters are as follows:
0 to 9 Numeric characters
- Pause
# A starting character for a group number
\ A delimiter for private data. Using this character before and after private data
hides the destination string.
S A character for password verification
: DTMF signal
One touch buttons