Original Orientation - Fuji Xerox ApeosPort-IV C7780 User Manual

3 Copy
Finisher D2-P with Booklet Maker
- Plain (64 - 79 gsm)
- Plain (91 - 105 gsm)
- Heavyweight (129 - 150 gsm)
- Extra-HW (177 - 220 gsm)
- X-HW Plus 2 (257 - 300 gsm)
- Plain Reload (80 - 90 gsm)
- HW Reload (106 - 128 gsm)
- HW Reload (151 - 176 gsm)
- Recycled (80 - 90 gsm)
- Gloss (106 - 128 gsm)
- Gloss (151 - 176 gsm)
- X-HW Gloss (221 - 256 gsm)
- Gloss Reload (129 - 150 gsm)
- HW Gloss Reload (177 - 220 gsm)
3
- Tab Stock (106 - 128 gsm)
- Tab Stock (151 - 176 gsm)
- X-HW Tab Stock (221 - 256 gsm)
The Finisher D2-P with Booklet Maker cuts the staple nails depending on the number
of sheets. The stapled nails may be bent depending on the type of paper used.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
Hole Punch
Sets the position for punching.
The positions for punching vary depending on a finisher installed.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]

Original Orientation

Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder. Always select [Sideways Images] when the
top of the document is placed facing the left side (horizontal text).
148
setting on the [Layout Adjustment] screen.
• In the following cases, the actual stapling position differs from the stapling position displayed
on the screen:
• When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position
at the right side.
• When [Original Orientation] is set to [Sideways Images], and [Staple] is set to one
position at the left side.
setting on the [Layout Adjustment] screen.
• If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
- Plain (80 - 90 gsm)
- Heavyweight (106 - 128 gsm)
- Heavyweight (151 - 176 gsm)
- Extra-HW Plus (221 - 256 gsm)
- Plain Reload (64 - 79 gsm)
- Plain Reload (91 - 105 gsm)
- HW Reload (129 - 150 gsm)
- Recycled (64 - 79 gsm)
- Recycled (91 - 105 gsm)
- Gloss (129 - 150gsm)
- HW Gloss (177 - 220 gsm)
- Gloss Reload (106 - 128 gsm)
- HW Gloss Reload (151 - 176 gsm)
- X-HW Gloss Reload (221 - 256 gsm)
- Tab Stock (129 - 150 gsm)
- HW Tab Stock (177 - 220 gsm)
- X-HW Tab Stock (257 - 300 gsm)