Switching The Power Off - Fuji Xerox ApeosPort-IV C7780 User Manual

Use also the Energy Saver feature to save power consumption while the machine is not
in use.
For information on the Energy Saver feature, refer to "Energy Saver Mode" (P.54).
Important • If the power is switched off, all the services of the machine will stop. When using the
1
Press the power switch to the [ | ] position to
switch the power on.
Note • The "Please wait..." message indicates that the
• If the machine is not powered on, check the

Switching the Power Off

The following describes how to switch the power off.
1
Before switching the power off, make sure that the machine has completed all copy or
print jobs. Then, make sure that the <Data> indicator does not light up.
Important • Do not switch the power off in the following situations. If the power is switched off, the
• When switching the power off, wait 5 seconds after outputs have been delivered.
2
Press the power switch to the [ ] position.
Important • Power off processing is performed internally on
Note • When powering the machine on after it has
machine throughout the day for jobs such as receiving fax, do not switch the power off.
machine is warming up. The machine is not
available during warming up.
following:
•The power cord is plugged in.
•The main power is switched on.
•The <RESET> button is in the depressed
position.
processing data may be erased.
• While data is being received
• While a job is being printed
• While a job is being copied
• While a job is being scanned
the machine for a while after the power is
switched off. Therefore, do not switch the main
power off immediately after switching the
power off.
been switched off, wait 15 seconds after the
touch screen has gone dark.
Power Source
Ground fault interrupter
Test button
2
51