Basic Setting - Yaesu WIRES-X HRI-200 Instruction Manual

Basic setting

Next, set the WIRES-X node user information.
● Basic operating information
Confirm the user information of your node and specify supplementary information.
1
From the "File" menu, click "Settings"
The "Settings" window will appear.
2
Click "Personal settings" - "WIRES ID information"
On the "Settings" window, the "WIRES ID information" screen
will appear.
3
Enter or select the following required items:
Serial No. ....................................Your HRI-200 serial number
DTMF ID .....................................Access code of your node for the analog station
CallSign ......................................Your node call sign
User ID .......................................Access code of your node for the digital station
[User ID change] .........................Click to change some parts of the user registration information.
City/State/Country ......................Your node location
Comment ....................................Entered comment will be shown in the "Comment" area on the node list of the WIRES-X
Confidential ID ............................Put a check-mark to hide your node from the node list of the WIRES-X server.
QSL exchange ............................Put a check-mark to display QSL card images transmitted from connection destinations (nodes
Get info. text ...............................Entered text will be shown using the "Get Info" function on the node list of the WIRES-X
4
Click [OK]
The settings will be stored and the "Settings" window will close.
Tip
For details on QSL card images, refer to "Displaying a QSL card image" (page 62).
How to Use
Tip
For details, refer to the next page.
server.
and rooms) and transmit the QSL card image of your node to the connection destination. Click
[...] to specify the QSL card image file of your node.
software.
Basic Operations
25