Closing The Wires-X Software - Yaesu WIRES-X HRI-200 Instruction Manual

● Checking the status of the bookmarked nodes and rooms
1
From the "View" menu, click "Group window" - "Bookmark list"
Tip "Bookmark list" is selected in the default setting.
If the bookmarked connection destinations are active, they will
be listed in the group window.
Tip
From the "Bookmark information" window, click "Show the offline Node/Room" to display inactive nodes and rooms in the group window.
● Text chatting with a node owner on the Internet
When you connect to another node or room, you can text chat with the connected destination owner.
1
Connect to a node or room on the Internet
2
In the text entry field below the chat window, type a message
3
Click [SEND] on the right
The message will be transmitted to the connected destination.
The transmitted message will be added to the top in the chat
window. Transmitted time and date, source host and destination
host will also be shown.
Tip When the cursor is inside the text entry field, pressing [Enter] on the
keyboard can also send a message.
Tips
• Click [CLR] to delete the chat history from the chat window.
• The chat history is deleted by when the WIRES-X software is closed. To keep the history, select "Settings" from the "File" menu to display the "Log file
settings" screen, and then click "Node log-file save" to insert a check-mark. For details, refer to page 88.

Closing the WIRES-X software

1
From the "File" menu, select "Exit"
Tip You can also close the software by clicking [X] on the top right side of
the main screen.
Tip
If "Enable WIRES-X Auto Start." has been selected when installing the WIRES-X software, the software will restart immediately after closing the software.
If you do not want to restart the software, click the WIRES-X icon on the right part of the Windows task bar (or from the hidden indicator list), then select
"Quit" or "Auto Start" to remove the check mark.
How to Use
Basic Operations
Chat history window
Text entry field
32