Opening A Wires-X Node Station; Establishing A Wires-X Node Station; Opening And Running A Wires-X Node Station - Yaesu WIRES-X HRI-200 Instruction Manual

Opening a WIRES-X node station

Establishing a WIRES-X node station

Obtain the following:
● Transceiver
• To set up a C4FM digital node station
C4FM digital transceiver (FTM-400DR (as of June 2014)) with a 10-pin Mini-DIN data
• To set up an FM analog node station
Either a C4FM digital transceiver with a 10-pin Mini-DIN data port, or an FM analog transceiver (use of a FTM-400DR is
recommended (as of June 2014)) with a 6-pin Mini-DIN data port
• Station-related components such as an antenna, power source, etc
● PC
• OS: Microsoft Windows Vista 7/8/8.1
• Processor Clock Frequency: 2.0 GHz or faster
• HDD: 1 GB or more of available space
• RAM: 2 GB or more
• USB port: Full-speed USB
• Display resolution: 1366 x 768 or higher
16-bit high color or higher (32-bit true color is recommended)
• LAN port: 100BASE-TX/1000BASE-T
● Internet connection
• ADSL 8 Mbps or faster (high-speed connection recommended)
• Global IP address (dynamic or static address usable)
A unique IP address is necessary for each WIRES node
• All of the following 6 UDP (user datagram protocol) ports must be connectable:
46100, 46110, 46112, 46114, 46120 and 46122
• When using a router: a network address and port translation (NAPT) is necessary
• One of the TCP ports must be connectable (when using the remote control function)
• When using a router: a network address and port translation (NAPT) is necessary
Cautions
z When running a firewall on your router, it is necessary to open the above ports to allow communication with the WIRES-X server.
z When using an internet connection for multiple concurrent applications, you may experience audio interruptions or an unstable connection with
WIRES-X.
● WIRES-X connection kit
This product

Opening and running a WIRES-X node station

Perform the following procedures.
● Register the node with the WIRES-X server (apply to obtain an ID number)
Register the WIRES-X node with YAESU. Once registration is completed, you will be issued an ID number from YAESU. For details,
refer to page 9.
● WIRES-X software installation
Use the supplied CD-R to install the software onto your PC. For details, refer to page 13.
Introduction
What is WIRES-X?
5