Node Information Settings - Yaesu WIRES-X HRI-200 Instruction Manual

Node information settings

Allows you to set a variety of information from basic information
such as your node ID to detailed information such as transmitting/
receiving operations.
Select "Settings" from the "File" menu to display the "Settings"
window.
In the "Settings" window, from the tree display on the left, click a
desired item to display its setting screen on the right.
[OK]: The settings are saved and the "Settings" window closes.
[Cancel]: The "Settings" window closes without saving the settings.
● WIRES ID information
Allows you to set the basic information such as comments displayed in the active lists as well as the node ID and location. For
details, refer to "Basic setting" (page 25).
● Location settings
Allows you to set the latitude/longitude of the node. For details, refer to "Basic setting" (page 25).
● Round QSO room settings
Allows you to set the information such as comments displayed in the active lists as well as your room ID. For details, refer to "Setting
the room" (page 36).
WIRES-X Software
Main Menu
77