Connecting Hri-200 To A Pc - Yaesu WIRES-X HRI-200 Instruction Manual

Connecting HRI-200 to a PC

When the HRI-200 is connected to the PC properly, the HRI-200 will turn on automatically when the PC is turned on.
Tip
When using a router to connect the PC to the Internet, refer to the instruction manual supplied with the router for information about attaching the PC to the
router, and the router to the Internet using LAN cables.
Also, refer to the instruction manual supplied with your router to perform the initial router configuration. Users generally access the IP address of the router
using a web browser to configure various settings on the displayed setup screen.
Preparation
LAN cable
(sold separately)
USB cable
Type A
(supplied with
plug
HRI-200)
Connecting Devices
To the Internet
Type B
plug HRI-200
(rear panel)
11