Changing The Ip Address; Opening The Router Ports - Yaesu WIRES-X HRI-200 Instruction Manual

● Changing the IP address
1
In the "Local Area Connection Status" dialog box, click
[Properties]
The "Local Area Connection Properties" dialog box will appear.
2
Select "Internet Protocol Version 4 (TCP/IPv4)", then click
[Properties]
The Internet protocol property setting dialog box will appear.
3
Select "Use the following IP address"
4
Enter the IP address you wrote down in step 6 of "Selecting an
IP address"
5
Enter "255.255.255.0" as the sub-net mask address
6
Enter the router IP address as the default gateway address
7
Enter the router IP address as the priority DNS server address
8
Click [OK] and [Close] in each dialog box
Tips
• The ddd part of an IP address (aaa.bbb.ccc.ddd.) can be set depending on the router range. See the router setup screen.
• When connecting several devices to the router, make sure the IP addresses do not overlap with each other.

Opening the router ports

First, refer to the instruction manual supplied with the router to make sure the router has the UPnP (Universal Plug and Play)
function.
On the router with the UPnP function, ports can be opened with the WIRES-X software.
On the router without the UPnP function, ports must be opened from the router setup screen.
Preparation
Preparing an Internet Environment
17