Quitting The Gm Operation - Yaesu WIRES-X HRI-200 Instruction Manual

12
Click [Mobile User list]
The "Mobile User list" window will appear.
Tip You can also display the window by clicking "Mobile User list" from the
"View" menu.
13
Select the mobile station you want to add as a group member
14
Click [MyRoom member]
The mobile station will be added to the list.
15
Click [Close]
The "GM (Group Monitor) Guide" window will appear again.

Quitting the GM operation

1
Click [GM] on the bottom right side of the main screen of the WIRES-X software
The "GM (Group Monitor) Guide" window will appear.
2
Click [Node Operation]
The "User ID Change" window will appear.
Tip You can also display the window by clicking "Settings" from the "File" menu to display the "WIRES ID information" screen, then clicking [User ID
change].
3
In the "Style" area, select "Open"
4
Click [OK]
The "GM (Group Monitor) Guide" window will appear again.
5
Click [Room Operation]
The "Room Open" window will appear.
Tip You can also display the window by clicking "Settings" from the "File" menu to display the "MyRoom information" screen, then clicking [Setup].
6
In the "Style" area, select "Open" or "Closed"
7
Click [Room Activation]
The WIRES-X server information will be updated.
8
Click [OK]
The "GM (Group Monitor) Guide" window will appear again.
9
Click [Close]
Your node will operate as a normal node, and your room will be normally open or closed.
Tip
Just to quit the GM room operation, remove the check-mark from "Room Active" in step 6.
In this case, when starting to open and organize a room not in the GM mode next time, put a check-mark in the "Room Active" checkbox, then select
"Open" or "Closed".
How to Use
Advanced Operations
47