Initial Setting (Setting Is Required Only Once At The Beginning); Start The Transceiver - Yaesu WIRES-X FT3D Instruction Manual

Initial Setting (setting is required only once at the beginning)

Start the transceiver

◎ Portable Digital Node mode (Supports linking to the Internet only in C4FM digital mode)
 FT3DR/DE or FT2DR/DE
1. Press and hold the [X] key, [BAND] key and the POWER switch to turn the transceiver ON.
"PDN" is displayed on the LCD screen.
 FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [DX] key and the POWER switch to turn the transceiver ON.
"PDN" is displayed on the LCD screen.
 FTM-300DR/DE or FTM-400DR/DE
1. Press and hold the [DX] key and the POWER switch to turn the transceiver ON.
"WIRES-X PDN" is displayed on the LCD screen.
 FTM-100DR/DE
1. Press and hold the [DX] key and the POWER switch to turn the transceiver ON.
"PDN" is displayed on the LCD screen.
◎ Portable HRI Mode (Supports Internet communication in digital mode and analog mode)
 FT3DR/DE or FT2DR/DE
1. Press and hold the [X] key, [BACK] key and the POWER switch to turn the transceiver ON.
"WIRES-X" is displayed on the LCD screen.
 FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [DX] key, [GM] key and the POWER switch to turn the transceiver ON.
"YAESU" logo and "WIRES-X" logo is displayed on the LCD screen.
When connected to a PC and communicating with the WIRES-X software, "WIRES-X NODE" is displayed in the
center of the screen.
 FTM-300DR/DE
1. Press and hold the [DX] key, [GM] key and the POWER switch to turn the transceiver ON.
"YAESU" logo and "WIRES-X" logo is displayed on the LCD screen.
When connected to a PC and communicating with the WIRES-X software, "WIRES-X NODE" is displayed in the
upper of the screen.
 FTM-100DR/DE
1. Press and hold the [DX] key, [GM] key and the POWER switch to turn the transceiver ON.
"WIRES-X" logo is displayed on the LCD screen.
• Repeating the above operation will return the transceiver to the normal mode.
• To switch between "Portable Digital Node Mode" and "Portable HRI Mode", start with the normal mode first and then
perform the above operation.
16