Yaesu WIRES-X HRI-200 Instruction Manual page 58

8
Click [Set]
The data will be stored on "Local News".
The registered data will be added to the list display area in the "News list" window.
Tip
Up to 5,000 news data files can be registered with your node and room in total.
● Deleting the news data of your station
1
Display the "News List" window
2
From the tree display, click "Local News"
The news data of your station will be listed in the list display area on the right.
3
Place the cursor over the data you want to delete and right-click on it
The command list will appear.
4
Click "Delete"
The pointed data will be deleted from the list.
● Organizing the news data of your station
The WIRES-X software assigns control numbers automatically to data files registered with "Local News". Data files can be registered
until the control number reaches 60,000.
Since control numbers of deleted data will not be reassigned to other data, the control number may reach 60,000 even when less
data files are shown in the list.
However, following the steps below allows you to reassign numbers to data with control numbers of over 50,000.
1
Display the "News list" window
2
Scroll the list to the right until the right end is displayed
3
In the "No." column, confirm the largest number is over 50,000
Tip Clicking "No." sorts data in numerical order.
How to Use
Useful Functions
Data control number
58