Setting The Wires-X Node Information; Configuring The Transceiver Settings - Yaesu WIRES-X HRI-200 Instruction Manual

Setting the WIRES-X node information

When using the WIRES-X software for the first time, set the basic information and configuration of the node using the WIRES-X
software.
Cautions
z If your transceiver supports the HRI-200 mode (FTM-400DR/DE), the settings will automatically be reflected into the transceiver.
z If your transceiver does not support HRI-200 mode (connecting with a 10 pin to 6 pin cable), the settings will not be reflected into the transceiver. You will
need to manually configure the same settings on the transceiver.

Configuring the transceiver settings

First, configure the WIRES-X node transceiver settings.
1
From the "File" menu, click "Transceiver"
The "Transceiver" window will appear.
2
In the "Operation mode" area, select the operating mode
Tip When "Digital DW" or "Digital Double" is selected, you can configure
the settings in the "Preset Search CH" area.
3
In the "Voice CH" area, configure the voice channel settings
Tip
For details, refer to the next page.
Caution Configure all the setting items. Otherwise, the node cannot be
operated.
4
In the "Preset Search CH" area, set the preset search channel
operations
Tip
For details, refer to "Setting the preset search channel" (page 34).
5
Click [OK] or [Apply]
The settings will be stored.
How to Use
Basic Operations
23