Connecting Hri-200 To Transceivers - Yaesu WIRES-X HRI-200 Instruction Manual

Connecting HRI-200 to transceivers

Cautions
z Turn off the transceiver before connecting cables.
z Provide a DC 13.8 V transceiver power supply separately.
● When operating with a transceiver
C4FM digital transceiver
(such as FTM-400DR)
FM analog transceiver
(such as FT-8900)
● When operating with 2 transceivers
C4FM digital transceiver
for preset search channels
(such as FTM-400DR)
C4FM digital transceiver
for operation channels
(such as FTM-400DR)
Tips
• When using an FM analog transceiver, set the data communication port rate to 1,200bps on the transceiver. For details, refer to the instruction manual
supplied with the transceiver.
• When using a YAESU FTM-400DR/DE transceiver as a node, turn on the transceiver while pressing [D/X] and [GM] keys. This sets the transceiver to the
connection-only mode, and menu settings including the port rate setting will not be required. [HRI-200] will appear on the FTM-400DR/DE screen.
To antenna
Coaxial cable
(sold separately)
To antenna
Coaxial cable
(sold separately)
To antenna
Coaxial cable
(sold separately)
To antenna
Coaxial cable
(sold separately)
Preparation
10 pin
10 pin
plug
plug
Mini-DIN digital cable
(supplied)
10 pin
6 pin
plug
plug
Mini-DIN digital cable
(supplied)
10 pin
10 pin
plug
plug
Mini-DIN digital cable
(such as CT-174)
10 pin
plug
Mini-DIN digital cable
(supplied)
Connecting Devices
HRI-200
(rear panel)
Type B
plug
To a PC
USB cable
(supplied)
HRI-200
(rear panel)
Type B
plug
To a PC
USB cable
(supplied)
HRI-200
(rear panel)
Type B
10 pin
plug
plug
To a PC
USB cable
(supplied)
12