When the port registration is complete, the communication
status will be checked again.
When checking completes, the "OK" or "NG" will appear on the
right side of each port name.
7
When "OK" appears for each port, click [Close]
The "WIRES ID Activation" window will appear again.
Caution
If "NG" still appears, ports cannot be opened using the WIRES-X
software.
Tip
To remotely control a node station using the remote monitor function, the TCP port 46190 (default value) must be open. For details, refer to "Operating the
WIRES-X software remotely" (page 48).
Taking security measures
Make sure to take security measures against interception and unauthorized access using a security service provided by the internet
provider or a firewall program for the router and PC.