Yaesu WIRES-X HRI-200 Instruction Manual page 85

● Digital ID settings
This menu appears only during a digital operation.
Voice CH
Configure the digital ID transmission setting for the voice channel.
Preset Search CH
Configure the digital ID transmission setting for the preset search channel.
<Universal>
ID TX ..........................................Setting this to ON (with a check-mark) transmits the digital ID periodically.
Interval Time ...............................The digital ID transmission interval can be set from every 1 minute to every 60 minutes in 1
[TEST] ........................................Click to transmit a digital ID signal just once for the channel.
WIRES-X Software
minute increments.
Tip This setting can be configured only when "ID TX" is set to ON.
Caution
At the node operating frequency, be careful not to interfere other stations when setting and operating
your station.
Caution While connecting to another node or room, test transmission does not function.
Main Menu
85