Severing The Connection; Connecting To A Gm Room Automatically - Yaesu WIRES-X HRI-200 Instruction Manual

Severing the connection

From the "Connect" menu, select "Disconnect" to sever the
connection from a node/room on the Internet.
Caution This item is available only while connecting to a node/room on
the Internet.

Connecting to a GM room automatically

From the "Connect" menu, select "GM Auto connect" and insert a
check-mark, your node will connect to the specified GM room as
soon as the WIRES-X software starts.
Selecting "GM Auto connect" again removes the check-mark and
severs the connection from the GM room.
Caution
This item is available only when your node operates as a
GM node and the GM room is specified as the connection
destination in the "GM Room list" window.
Tip
For details on how to use the GM (group monitoring) function, refer to "Using the GM function" (page 42).
WIRES-X Software
Main Menu
96