Basic Set Up And Operations; Stand Alone Operation - Yaesu DR2XLAN Operating Manual

9. [ Example ] Basic Set up and Operations

Stand Alone Operation

Setting Content (Frequencies are shown for example only, use your repeater coordinated frequencies)
CH-A
CH-B
PRIORITY ON
DG-ID: 01
DEFAULT ID: 01
DP-ID: The system manager USER-3 has registered the DP-ID
• The group members, USER-1, USER-2 and USER-3 have set the transmit DG-ID to 01 and the receive
DG-ID to 00.
• The system manager, USER-3 knows the uplink frequency of CH-B. The group members USER-1 and
USER-2 know only the normal uplink frequency of CH-A.
• USER-4 is not a group member, therefore sets the transmit DG-ID default to 00 and the receive DG-ID to 00.
The examples of the user operation with the above settings:
z The group members USER-1, USER-2 and USER-3 may communicate the normal operation by using
the CH-A frequency.
z When the USER-1 and the USER-2 are communicating with each other using CH-A, the USER-3 allows
preferentially contact to the group members in an emergency by using the CH-B uplink frequency.
z USER-3 may change the repeater setting temporarily by using the uplink frequency even if CH-A is
in use, and also record messages to members.
z Since the DG-ID is different for USER-4 who is not the group member, the uplink signal may not be
repeated in the digital mode, but in the analog FM mode, USER-4 may transmit on the uplink and use
this repeater, because the setting of CH-A is "AUTO AMS". When communicating only with group
members, only the C4FM digital transceiver may be received by changing the operation mode of
CH-A to FIX DIGITAL, so only the group members with the same DG-ID may communicate.
DR-2X / DR-2XE Operating Manual
User 3
System Manager
DP-ID registered
DG-ID: TX01RX00
User 1
DG-ID: TX01RX00
RX
TX
RX
TX
User 4
RPT1
DG-ID: TX00RX00
User 2
DG-ID: TX01RX00
DG-ID: 01
Default: 01
AUTO AMS
AUTO AMS
FIX DIGITAL
FIX DIGITAL
448.700 MHz
443.700 MHz
449.000 MHz
444.000 MHz
23