Adjusting Analog Sound; Adjusting Analog Sound Volume - Yaesu WIRES-X HRI-200 Instruction Manual

Adjusting analog sound

Input/output sound volume on the node can be adjusted to an appropriate level with the "Preset Volume" setting. Fine adjustment
can also be made according to your preference. This adjustment is available only while operating in analog mode.
Tip
The volume of voice communications between digital nodes and sound data played for the news function cannot be adjusted.

Adjusting analog sound volume

● Setting the node operating mode to analog
1
Start the WIRES-X software
2
From the "File" menu, click "Transceiver"
The "Transceiver" window will appear.
3
In the "Operation mode" area, select "Analog"
4
Click [OK]
● Monitoring analog sound
From the "View" menu of the WIRES-X software - "Audio adjustment", display the "Audio adjustments" window where audio can be
displayed as a waveform graph.
This "Audio" has solid lines and dotted lines as indications of the input sound level.
Solid lines ...... Indicates the maximum and minimum sound volume HRI-200 can receive.
Dotted lines .... Indicates the maximum and minimum ideal sound volume.
In the "Volume" area, colored indicator bars indicate the current input/output sound volume.
Maximum volume
Ideal volume range
Minimum volume
● Adjusting the input sound volume
1
From the "View" menu, click "Audio adjustment"
The "Audio adjustments" window will appear.
2
In the "Graph select" area, click [Start]
[Start] will be switched to [Displaying].
When sound is received, the waveform will appear in the "Audio" area.
3
From a level adjusted FM analog transceiver (such as VX-8D or FT1DR), transmit the #1 DTMF sound in FM mode
When the node transceiver receives it, the DTMF sound waveform will appear in the "Audio" area.
How to Use
Advanced Operations
Output sound indicator
Input sound indicator
52