Yaesu WIRES-X HRI-200 Instruction Manual page 87

HTML/XML Header .....................Enter information (such as HTML tags or style sheet information for XML) you want to add to
HTML/XML Footer ......................Enter information (such as HTML tags) you want to add to the end of your output data.
Table layout ................................Select the output format for HTML.
Save CSV format ........................Inserting a check-mark (ON) outputs a tab-separated text (csv) file at the same time.
Notify window title .......................The update information of the output data file can be informed to other applications.
WIRES-X Software
the beginning of your output data.
Example: To call an xsl style sheet for XML
<?xml version="1.0" encoding="Shift_JIS"?>
<?xml-stylesheet type="text/xsl" href="Active.xsl"?>
To add style sheet information as shown above to the beginning of output data, enter the
information here.
Create an xsl style sheet fie (in case when the example above, "Active.xsl") and store it in the
same folder as the saved data file to display the information on your web browser using the
created style information. The result displayed using the style sheet differs depending on the
web browser.
Tip With WIRES-X, the following xsl style sheet samples are available for each tab.
Group.xsl (for "Group window")
Active.xsl (for "Active ID")
Room.xsl (for "Room ID")
MyRoom.xsl (for "MyRoom logon ID")
ON (with a check-mark) .......... Outputs in table-layout format.
OFF (without a check-mark) ... Outputs in tab-separated format.
Tip This setting does not function when "XML Style" is set to ON.
The file name will be the same as the HTML/XML file with the extension ".csv".
Normally, keep this box blank.
Main Menu
87