Initial Setting (Setting Is Required Only Once At The Beginning); Start The Transceiver; Starting The Wires-X Software; Communication Port Setting - Yaesu Wires-X Instruction Manual

Initial Setting (setting is required only once at the beginning)

Start the transceiver

◎ Portable Digital Node mode (Supports linking to the Internet only in C4FM digital mode)
1. Press and hold the [X] key, [BAND] key and the POWER switch to turn the transceiver ON.
"PDN" is displayed on the LCD screen.
◎ Portable HRI Mode (Supports Internet communication in digital mode and analog mode)
1. Press and hold the [X] key, [BACK] key and the POWER switch to turn the transceiver ON.
"WIRES-X NODE" is displayed on the LCD screen.
Repeating the above operation will return the transceiver to the normal mode.

Starting the WIRES-X software

1. Double-click the [Wires-X] icon on the PC desktop.
・Setting the Internet access security (Only when Windows Security Alert screen appears)
If the Windows Security Alert window appears when starting
WIRES-X software, click [Allow access] to allow Internet
access from the WIRES-X software.

Communication port setting

When starting the WIRES-X software for the first time, the "COM port setting" window will appear. Set the
communication port with the transceiver connected to the PC.
1. Click [▼] in the "Serial Port Selection" column and click the COM port (displayed as "Prolific USB-to-Serial
Comm Port (COMX)") connected to the transceiver.
• You can also select a communication port by clicking "Serial port number specify
directly.
• Click the [Device Manager] to open the Windows Device Manager.
2. Click the [OK].
The communication port may be changed from the [File (F)]
menu - [Communication port] of WIRES-X software.
12
"
and entering the COM port number