Uninstalling The Wires-X Software - Yaesu WIRES-X HRI-200 Instruction Manual

Uninstalling the WIRES-X Software

Tip
If "Enable WIRES-X Auto Start." was selected when installing the WIRES-X software, right-click the WIRES-X icon displayed on the Windows task bar,
then select "Quit" not to reboot the software automatically.
1
Close the WIRES-X software
2
View the supplied CD-R and run the "Install.exe." file
The "WIRES-X installer" window will appear.
3
Click [WIRES-X Software Setup]
The "Welcome to the WIRES-X Setup Wizard" window will
appear.
4
Click [Next]
The "Change, repair, or remove installation" window will appear.
5
Click [Remove]
The "Ready to remove WIRES-X" window will appear.
6
Click [Next]
The "Files in Use" window will appear.
WIRES-X Software
100