Sided Printing; Tray Management; Tray Settings - Fuji Xerox DocuPrint CM405 df User Manual

• Select Tray
Purpose:
To specify the input tray.
Values:
Bypass Tray
*
Tray1
Tray2
NOTE:
• Tray2 is available only when the optional 550 sheet feeder is installed.
• 2 Sided Printing
Purpose:
To print on both sides of a sheet of paper.
Values:
1 Sided*
2 Sided Binding of Output
• Sides Per Page
Purpose:
To print two or four original pages to fit onto one sheet of paper.
Values:
*
Off
2 Sides per Page
4 Sides per Page
• PDF Password
Purpose:
To enter the password when you print the secure PDF job.
Values:
Enter PDF Password

Tray Management

Use the Tray Management menu to define the print media loaded in the standard 550 sheet tray and the optional
550 sheet feeder.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.

Tray Settings

To configure tray settings.
342
Using the Operator Panel Menus and Keypad
The paper is fed from the bypass tray.
The paper is fed from the standard 550 sheet tray.
The paper is fed from the optional 550 sheet feeder.
Long Edge Binding
Short Edge Binding
Prints one page on one side of a sheet of paper.
Prints two pages on one side of a sheet of paper.
Prints four pages on one side of a sheet of paper.
Enter the password to print the secure PDF job.
Prints on one side of a sheet of paper.
*
Prints on both sides of a sheet of paper to be bound by
long edge.
Prints on both sides of a sheet of paper to be bound by
short edge.