Setting The Features; Setting The Certificate In The Ipsec Digital Signature Mode - Fuji Xerox DocuPrint CM405 df User Manual

Setting the Features

You can set various security features using digital certificates.
This section includes:
• "Setting the Certificate in the IPsec Digital Signature Mode" on page 187
• "Setting the SSL-use Server Certificate (HTTP/IPP)" on page 188
• "Setting LDAP-SSL/TLS Communication" on page 188
• "Setting Server Certificate Verification for LDAP-SSL/TLS Communication" on page 189
• "Setting Client Certificate for LDAP-SSL/TLS Communication" on page 189
• "Setting for Wireless LAN WPA-Enterprise (EAP-TLS)" on page 190
• "Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)" on
page 191

Setting the Certificate in the IPsec Digital Signature Mode

NOTE:
• To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see
1
Import the certificate to be used with IPsec.
See also:
• "Importing a Digital Certificate" on page 183
2
Set the certificate to be used with IPsec.
See also:
• "Setting a Digital Certificate" on page 184
3
Confirm whether the certificate is set correctly in IPsec.
See also:
• "Confirming the Settings of a Digital Certificate" on page 185
4
Launch CentreWare Internet Services.
5
Click the Properties tab.
6
In the left navigation panel, scroll down to Security and select IP sec.
7
Select the Enabled check box for Protocol.
8
Select Digital Signature from the IKE Authentication Method list.
9
Set each item, as necessary.
10
Click Apply.
11
After restarting the printer, IPsec communication using digital signatures is enabled. You can execute IPsec
communication (Digital Signature mode) between the printer and the network device (such as computer) on
which the certificate and IPsec are set identically as on this device.
"Preparing to Manage Certificates" on page 181.
Printing Basics
187