Receive Mode; Extel Hook Threshold - Fuji Xerox DocuPrint CM405 df User Manual

Extel Hook Threshold

Purpose:
To select the external telephone hook detection threshold for the condition in which a telephone line is not being
used.
Values:
Lower
*
Normal
Higher
• Incoming Defaults
Purpose:
To configure settings for incoming fax.

Receive Mode

Purpose:
To select the default fax receiving mode.
Values:
TEL Mode
FAX Mode*
TEL/FAX Mode
Ans/FAX Mode
DRPD Mode
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal
speaker when Receive Mode is set to TEL/FAX Mode.
Values:
Off
Min
Middle
*
Max
Sets the external telephone hook detection threshold to Lower.
Sets the external telephone hook detection threshold to Normal.
Sets the external telephone hook detection threshold to Higher.
Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external phone and then pressing the remote receive code, or by
selecting Manual Receive in OnHook to On (you can hear voice or fax tones
from the remote machine) and then pressing
Manual Receive, see
page 272.
Automatically receives faxes.
When the printer receives an incoming fax, the external telephone rings for the
time specified in Auto Receive TEL/FAX, and then the printer automatically
receives a fax. If an incoming call is not a fax, the printer beeps from the internal
speaker indicating that the call is a telephone call.
The printer can share a telephone line with an answering machine. In this mode,
the printer will monitor the fax signal and pick up the line if there are fax tones. If
the phone communication in your region is serial, this mode is not supported.
Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive
ring service must be installed on your telephone line by the telephone company.
After the telephone company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for that specific ring
pattern.
Turns off the volume of the ring tone.
Sets the volume of the ring tone to minimum.
Sets the volume of the ring tone to middle.
Sets the volume of the ring tone to maximum.
"Receiving a Fax Manually in the TEL Mode" on
Using the Operator Panel Menus and Keypad
(Start) button. For details about
309