Reduce / Enlarge - Fuji Xerox DocuPrint CM405 df User Manual

Reduce / Enlarge

To reduce or enlarge the size of a copied image from 25 to 400% when you copy original documents from the
document glass or the DADF.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
1
Select the Output tab, and then select Reduce / Enlarge.
2
Select the desired setting, and then select OK.
• mm series
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
200%
141% A5 → A4
122% A5 → B5
100%*
81% B5 → A5
70% A4 → A5
50%
• inch series
200%
154%
129% 8.5 x 11" → 8.5 x 14"
100%*
78% 8.5 x 14" → 8.5 x 11"
64%
50%
NOTE:
• You can also specify the value in increments of 1% from 25 to 400 by selecting
number pad. See the following table for specific zoom ratios.
Copy A5
Original
A5 100%
B5 81%
A4 70%
The method to load print media depends on the size and orientation of a print media, see
in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 150
Bypass Tray" on page
For print media that can be loaded, see
206
Copying
B5 A4
122% 141%
100% 115%
86% 100%
153.
"About Print Media" on page
or or
entering a value using the
"Loading Print Media
or "Loading Print Media in the
142.