Saturation; Auto Background Suppression; Collation - Fuji Xerox DocuPrint CM405 df User Manual

Saturation

To adjust the amount of colors of the copy to make the colors darker or lighter than the original.
1
Select the Quality tab, and then select Saturation.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Vivid
Normal*
Pastel

Auto Background Suppression

To suppress the background of the original to enhance text on the copy.
1
Select the Quality tab, and then select Auto Background Suppression.
2
Select On, and then select OK.

Collation

To sort the copy output. For example, if you make two copies of three page documents, one complete three page
document will be printed followed by the second complete document.
NOTE:
• You can collate more pages when 512MB memory or hard disk unit is installed.
1
Select the Output tab, and then select Collation.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Auto*
Collated
Uncollated
When you are using the document glass and it is set to Collated, the display prompts you for another page
after pressing the
If you want to place a new document, replace the document with a new document, and then select
a
Continue or press the
If you finish copying, select Print Now.
b
Makes the color of the copy more vivid.
The color saturation is the same as the original.
Makes the color of the copy less vivid.
Only the documents loaded from the DADF are copied in collated order.
Copies in collated order.
Does not copy in collated order.
(Start) button.
(Start) button.
205
Copying